|
|
M-1 Paint / Stain Additive
Advanced Mildewcide - Inhibits mildew, Mold & Algae
For Use in all Interior / Exterior Latex, Water Based, Oil & Solvent based Paints, Stains, coatings and Adhesives. No Odor / Low VOC
| Active Ingredients: |
3-lodo-2 propnl butyl carbamate
20%
Other Ingredients
..80%
Total
..100% |
Environmental Hazards: This pesticide is toxic to fish & aquatic organisms. Do Not Apply directly to water. Do not contaminate water when disposing of equipment, wash waters of rinsate.
Storage and Disposal: Do Not contaminate water, food or feed by storage or disposal.
Pesticide Storage: Do Not store with strong oxidizing agent or strong (concentrated) acids. Keep container tightly closed when not in use. Do Not reuse container.
Pesticide Disposal: Wrap empty container & paint / stain stirrer in newspaper & dispose immediately in trash. Never place any unused product down any indoor or outdoor drain.
Caution - Precautionary Statements, Hazards to Humans & Domestic Animals: Do Not apply this product in a way that will contact any person or pet. Causes skin irritation and moderate eye irritation. Avoid contact with eyes, skin & clothing. Harmful if swallowed, inhaled or absorbed through the skin. Wash thoroughly with soap & water after handling. Users should wash hands before eating, drinking, chewing gum, using tobacco or using the toilet. Remove contaminated clothing & wash before reuse.
First Aid
If in Eyes: Hold eye open & rinse slowly & gently with water for 15 - 20 minutes. Remove contact lenses if present after the first 5 minutes, and then continue rinsing eye. Call a poison control center or doctor for treatment advice.
If on Skin or Clothing: Take off contaminated clothing. Rinse skin immediately with plenty of water for 15 - 20 minutes. Call a poison control center or doctor for treatment advice.
If Swallowed: Call a poison control center or doctor immediately for treatment advice. Have person sip a glass of water if able to swallow. Do Not induce vomiting unless told to by the poison control center or the doctor. Do Not give anything by mouth to an unconscious person.
If Inhaled: Move person to fresh air. If person is not breathing, call 911 or an ambulance, and then give artificial respiration, preferably mouth-to-mouth, if possible. Call a poison control center or doctor for further treatment advice. Have the product container or label with you when calling a poison control center or doctor.
Emergency medical information (800-900-4044)
Directions for Use: it is in violation of Federal law to use this product in a manner inconsistent with its labeling. M-1 Advanced Mildewcide is a low VOC formula and has no odor.
Note: Read precautionary statements prior to handling this product
Mixing Instructions: Pour entire contents (7.5 ounces) into a 5-gallon container of paint / stain or other coating. Shake or stir thoroughly for 2 - 3 minutes. Apply coating as directed by the manufacture of product being used. M-1 Advanced Mildewcide is for protecting the product being applied, NOT the substrate, so make sure your substrate is clean & free of mold, mildew & their spores.
| 1 or more bottles at $24.75, Free Shipping
|
|
| 1 or more at $19.75 each, with Purchase of WOODguard, Free Shipping
|
|
|
|
